Wanner SM

Metering pump in PVC

  • Low cost
  • Easy to operate
  • Low noise (less than 85dB)
  • Different versions available (Stainless steel, PVDF, Acrylic, PVC)

READ MORE DATA SHEET QUOTE

Milton Roy MAXROY®

Industrial Grade Metering Pump

  • Rugged industrial version
  • Reliable operation
  • Flow up to 1100 L/s
  • Pressure up to 28 bar

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal X (PX)

High-Pressure Metering Pump

  • Meets API675
  • Accurate dosing adsjustment during operation or stop
  • Suitable for most industrial fluids
  • Pressure up to 1029/1379 bar
  • Flow up to 16490 litre pr hour
  • NORSOK materialer
  • Double diaphrams available

READ MORE DATA SHEET QUOTE

Milton Roy mRoy Series

Critical Process Control

  • Comply to API675
  • Accurate dosing for industrial use
  • Seal less design on plunger
  • Diaphram life design with 96 thousand hours
  • Flow from 0,8 to 299 L/h
  • Pressure up to 137 bar

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G15/G17

Sealless pump for horizontal installation

  • Pump head can be delivered in 316L, Duplex, Hastelloy C or Brass
  • Maximum flow rate : 58,7 l/min
  • Maximum pressure : 172 bar
  • Very efficient and reliable
  • Lowers maintenance costs

READ MORE DATA SHEET QUOTE

Mouvex

Eccentric disc Pump

  • Extremely reliable
  • Easy maintenance
  • Constant performance over time
  • Energy optimized
  • Seal-less design

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G10

Sealless diaphragm pump

  • Different versions available (stainless steel, brass, cast iron, non mettalic)
  • API 675 option available
  • Wide range of applications
  • Lowers maintenance costs
  • Able to run dry without damage
  • Long service life

READ MORE DATA SHEET QUOTE

Mouvex

Sliding Vane Pump

  • ATEX certification
  • Reduced energy consumption
  • Up to 25m3/h
  • Excellent volumetric characteristics

READ MORE DATA SHEET QUOTE

Netzsch NEMO

Progressing cavity pump

  • Up to 500 m3/h at 48 bars
  • Large variety of shaft seals
  • Fits to a lot of applications
  • Large pressure and capacity range

READ MORE DATA SHEET FSIP VIDEO QUOTE

All-Flo A100

Air operated metal pump

  • Simple solution for challenging applications
  • Suitable for almost any fluid transfer application
  • Air operated
  • High temperature and abrasion protection

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal PR

Variable Excentric Drive Metering Pump

  • Compliant with API 675 standards
  • Capacity adjustable while running or stopped.
  • Accurate dosing of most fluids in industrial processes
  • Pressure up to 1031 bar
  • Flow up to 12549 litre pr hour
  • NORSOK materials
  • Doble membranes available

READ MORE DATA SHEET QUOTE

All-Flo Solenoid

All Flo Solenoid Adapters

  • Remotely start and stop with an in-line solenoid valve for the pump’s air line.
  • Simple
  • Monitors pumping operations
  • Maximizes efficiency

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal Flat Twin (PX FT)

Process-Critical Metering Pump

  • Meets API675
  • Very high capacity version
  • Suitable for most industrial liquids
  • Pressure up to 1029 bar
  • Flow up to 32295 litre pr hour
  • NORSOK materials
  • Double diaphrams available

READ MORE DATA SHEET QUOTE

M PUMPS V MODULAR

Magnetic Drive Sliding Vane pump (clone)

  • Magnetic Drive
  • Multistage Sliding Vane Pump
  • Close Coupled
  • Suitable for toxic media

READ MORE Brochure QUOTE

LMI TD Dosing pumps

LMI TD pumps

  • Revolutionary FluxDrive™ technology with fractional turndown capability
  • Field upgradable firmware via USB-C drive interface
  • Integrated AccuPrime™ and degassing technology
  • Reduced weight, increased efficiency, and universal 115-230V, 50/60 Hz power supply
  • Download pump data and always ensure the most current feature set and firmware upgrades
  • Enables automatic degassing of the discharge line for Stay-Prime functionality 

READ MORE DATA SHEET QUOTE

All Flo kit

Drum pump kit

  • Convenient and swift transfer of fluids
  • Very fast suction
  • Can handle most fluids
  • Affordable price

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G04

Industrial high pressure pump

  • Maximum pressure up to 172 bar
  • Max Flow is 11,2 l/min                                        
  • Different models available (BSPT Ports, tri-clamp flanges, Din flanges, ANSI RF flanges)
  • API 674, API 675 and ATEX standards available

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal PL & PLG

Consistently Accurately Metering Pump

  • Compliant with API 675 standards
  • High adaptability and accuracy
  • Minimized footprint and weight
  • Suitable for the majority of fluids
  • Modular design
  • Long life
  • Global design: can comply with the main worldwide certifications and systems: ATEX, NACE, SASO, Customs Union, etc.

 


READ MORE DATA SHEET QUOTE

Netzsch PERIPRO

NETZSCH PERIPRO peristaltic pump

  • Maintenance friendly design

  • Low shear and reversible pumping

  • Extremely high suction capability

  • Up to 70 % solids in conveyed media

  • Indefinite dry running


READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal PQ

Modular Designed Metering Pump

  • Meets API 675 standards
  • Can be delivered in fixed-stroke design
  • Precise capacity adjustment during operation or shutdown
  • Suitable for most fluids in industrial processes
  • Pressure up to 1035 bar
  • Flow rate up to 8657 liters per hour
  • NORSOK-approved materials
  • Double diaphragms available

READ MORE DATA SHEET QUOTE

Netzsch NEMO® Mini BH

Hygienic Pump

  • Universally applicable
  • Low to very high viscosity
  • Shear-sensitive
  • Substances with or without solid content

READ MORE DATA SHEET QUOTE

Netzsch TORNADO, T1-F, T.Proc & T.Sano

Rotary lobe pump

  • Capasity up to 1400m3hr and up to 12 bar
  • Innovative design
  • Three main types: T1-F, T.Proc®, T.Sano®
  • Maintenance friendly pumps
  • Long lifetime

 


READ MORE Tornado Brochure QUOTE

Tuthill 1000 series

Pump for lubrication and circulation

  • Self priming
  • Non-pulsating flow
  • Mechanical seal as standard
  • Can be vertically mounted

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G35

API 674 pump

  • Maximum pressure up to 103 bar
  • Maximum flow rate 138 l/min
  • Also available with cast iron pump head and brass pump head
  • ATEX standard available
  • Option: Electronic Flow Rate Control for Safe Zone Installations
  • Option: Oil Cooler for Hot Duties

READ MORE DATA SHEET QUOTE

All-Flo A150

AOD pump

  • Flexible and mobile pumping solution
  • Suitable for most liquids / chemicals
  • Excellent dry-lift capabilities
  • Air operated, no electricity needed
  • Low / Easy on-site maintenance

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G03

Industrial high pressure pump

  • Maximum pressure up to 83 bar
  • Max Flow @69 bar is 11,7 l/min                                        
  • Different models available (tri-clamp flanges, Din flanges, ANSI RF flanges, non-metallic pump head.)
  • API 671, API 674, API 675 and ATEX standards available

READ MORE DATA SHEET QUOTE

Netzsch NOTOS

Multi screw pump

  • Oil and Gas application
  • Marine application
  • Lube oil pumping
  • Boiler feed pumping


READ MORE DATA SHEET QUOTE

Primeroyal PH

Critical-Process Applications Reach Higher Pressures

  • Compliant with API 675 standards
  • Adaptability and accuracy: capacity adjustable while running and stopped.
  • Suitable for most fluids used in industrial processes
  • Pressure up to 690 bar
  • Flow up to 948 L/h
  • NORSOK Materials

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal PN

Field-Proven Metering Pumps

  • Meets API 675 standards
  • Precise capacity adjustment during operation or shutdown
  • Suitable for most fluids in industrial processes
  • Pressure up to 1034 bar
  • Flow rate up to 9863 liters per hour
  • NORSOK-approved materials
  • Double or triple diaphragms available

READ MORE DATA SHEET QUOTE

Milton Roy Primeroyal PK & PKG Models

Low flow and high pressure

  • Compliant with API 675 standards
  • Adaptability and accuracy: capacity adjustable while running and stopped.
  • Suitable for most fluids used in industrial processes.
  • Pressure up to 930 bar
  • Flow up to 2500 L/h
  • NORSOK Materials
  • Double or triple membranes available

READ MORE DATA SHEET QUOTE

Blackmer/ Magnes

Sliding vane magnetic drive pump

  • Solids handling
  • Indefinite dry run
  • Low to Zero NPSHr - Cavitation & Vapor mixtures handling
  • Full curve & System Performance

READ MORE DATA SHEET Video QUOTE

Tuthill D-series

Pump for metering applications

  • With ORBIS™ Technology
  • Provides a non-pulsing flow
  • Long service life
  • High reliability
  • Very flexible for various applications

READ MORE DATA SHEET QUOTE

All-Flo PVDF

Plastic pump

  • Simple solution for challenging applications
  • Suitable for almost any fluid transfer application
  • Air operated
  • High temperature and abrasion protection

READ MORE DATA SHEET QUOTE

Wanner T100 PRO

high pressure pump for demanding applications

  • Maximum flow rate: 366 l/min
  • Maximum pressure 145 bar
  • Seal-less design
  • Available to meet API 674
  • Watch the video by clicking here: HYDRA-CELL

READ MORE DATA SHEET QUOTE

Milton Roy Milroy

Modular Metering Pumps for high pressure

  • Flexible with many options for industrial processes
  • Up to 8 pump heads on one motor
  • Flow from 125 to 7873 L/hr pr drive
  • Pressure from 7 to 1380 bar
  • Leak proof performance

READ MORE DATA SHEET QUOTE

WANNER HYDRA-CELL PRO G25

High pressure pump

  • Sealless design, small footprint, high volumetric efficiency.
  • Used in applications such: High pressure washing, chemical processing, high pressure machine tool coolant, metering and dosing chemical additives, sealless design, small footprint, high volumetric efficiency,
  • Ideal for Mining, oil production and refining, paper and pulp, reverse osmoses, water and wastewater


READ MORE DATA SHEET QUOTE

Tuthill T-series

Leak free pump

  • External gear design
  • Perfect for metering applications
  • Leak free
  • Magnetically coupled

READ MORE DATA SHEET QUOTE

Tuthill GlobalGear® series

Pump that is easy to service and maintain

  • Easy maintenance
  • Pressures up to 200 psi
  • Customized designs
  • Reliable

READ MORE DATA SHEET QUOTE

Wanner T200 PRO

High capacity diaphragm pump

  • Can run dry indefinitely
  • Maximum flow rate: 359 l/min
  • Maximum pressure: 241 bar
  • No risk of leakage
  • Available to meet API 674

READ MORE DATA SHEET QUOTE

Wanner Q155 PRO & Q330 PRO

High pressure diaphragm pump

  • Can run dry indefinitely
  • Maximum flow rate: 1249 l/min
  • Maximum pressure: 310 bar
  • Compact design and high efficiency
  • Available to meet API 674

READ MORE DATA SHEET QUOTE

Milton Roy Megaroyal

High-Volume, High Pressure Process Pump

  • Meets API675
  • Chemical Injection of high flow
  • Reliable and leakfree operation
  • Pressure up to 252 bar
  • Flow up to 48 m3/h
  • Compact execution

READ MORE DATA SHEET QUOTE

Wanner MT8

Easy maintenance triplex pump

  • For low flow rates at high pressure
  • Multiple-diaphragm design provides virtually pulse-free, linear flow without the need for expensive pulsation dampeners
  • Can handle a lot of different processing fluids
  • The integral relief valve protects the pump from over pressurization on the discharge side
  • Duplex option - drawings and ordering code added.
  • Diaphragm (Digit 8) J updated - PTFE (FDA-compliant wetted PTFE materials available on request - consult Wanner International)
  • Motor Flange Size (Digit 13) - Added within option L  IEC 71 B14 (MA only)


READ MORE DATA SHEET QUOTE