KS series
Horizontal pump for wastewater
- A double mechanical seals in oil bath
- Shaft in stainless steel AISI 420 dimensioned for heavy
duty - Long service life
READ MORE DATA SHEET QUOTE
Tesla disk pump
Tesla disk pump
- Can handle much higher viscosity than centrifugal pumps.
- Suitable for variable viscosity, temperature and dry matter content.
- Space savings compared with positive displacement pumps.
- Available in horisontal and vertical execution.
- Efficiency is 4-6% better than other similar style pumps.
READ MORE DATA SHEET QUOTE
Andritz ASP
Split case pump
- Easy and fast maintenance
- Excellent NSPH values
- Energy savings
- Highest efficiency (above 90%)
- Low pulsation
READ MORE DATA SHEET QUOTE
CS-CSX series
Stainless steel pump
- Capacity up to 500m3 / h and with lifting height up to 100m
- Can be delivered in hygienic version
- The impeller can be inspected easily by unscrewing the front lid without the use of special tools
READ MORE DATA SHEET QUOTE
MC series
Medium consistency pump
- Degassing without internal or external vacuum pump
- Flow rates up to 5,000 admt/d
- Heads up to 195 m
- Stock temperatures up to 140 °C (pressureless infeed)
READ MORE DATA SHEET QUOTE
KB series
Centrifugal pump for wastewater
- With two-channel open impeller and self-cleaning diffuser
- Shaft in stainless steel AISI 420 dimensioned for heavy duty
- High efficiency and long service life
READ MORE DATA SHEET QUOTE
Andritz ACP
Pump for pulp and paper industry
- Flow rate up to 9000m3/h
- Pressure up to 40 bar
- Perfect for Pulp and Paper inudstry, also excellent for water supply, waste water treatment, drainage or irrigation.
- Solids in the Media: Up to 8%
READ MORE DATA SHEET Watch video QUOTE
Trillium Italy
BB1 Split Case Pump
- Flow up to 30,000 m³ / h
- Head up to 600 m
- Industrial heavy duty versions
- Special water versions
- Maintenance Friendly
READ MORE DATA SHEET QUOTE
CP series
Dry installed sewage pump
- Head up to 75 m
- Flow rate up to 1,800 m3/h
- Free passage up to 140 mm
- Pressure up to 16 bar
- Temperature up to 120° C
READ MORE DATA SHEET QUOTE
Warman slurry pump range
Heavy duty slurry pump
- High performances & long service life
- Low energy usage
- Safe use
- Innovative streamlined impeller for outstanding slurry management
READ MORE DATA SHEET QUOTE
.jpg?width=750&height=750&name=Centrifugal%20pump%20(2).jpg)
Andritz ES
Centrifugal pump
- Design: single-stage volute casing with principal dimensions and performance chart according to DIN EN 733. Alternatively close-coupled design to save space.
- Head: up to 100 m
- Flow rate: up to 4,000 m³/h
- Pressure: up to 16 bar
- Temperature: up to 140° C
- Speed: up to 3,600 rpm
READ MORE DATA SHEET QUOTE
ASPM series
Multi stage axial split case pump
- Suitable for pumping clean liquids in water supply projects and desalination plants
- Performance up to 10 m3/s
- Head up 1000m
- Power up to 40 MW
READ MORE DATA SHEET QUOTE
CR series
Sanitary centrifugal pump
- Dedicated to the food industry or pharmaceutical production
- All international regulations available
- Performance up to 150m3/h
- Pressure up to 20m
- Temperature from -10 to 100°C
READ MORE DATA SHEET QUOTE
Andritz AD
Self-priming centrifugal pumps
- Excellent for Media with high gas content
- Flow rates up to 2000m3/h
- Pressure up to 16 bar
- Heads up to 75m
- Temp. up to 80°C
READ MORE DATA SHEET QUOTE
Blackmer System One (Frame A)
Robust centrifugal pump
- Large and oversized bearings
- Very stable shaft
- Low maintenance
- Heavy duty construction
- Meets ASME/ANSI specifications
READ MORE DATA SHEET QUOTE
Trillium RotoJet
Roto-Jet pitot tube pumps
- Reliable operation at low flow and high head
- No external lube system required
- No wear rings or close running clearances
- Robust design is insensitive to process upsets
- Pulsation free flow over the entire head-flow curve
- Reduced life cycle cost by optimizing hydraulic efficiency
- Process seals exposed only to suction pressure for maximum seal life
- High heads achieved in a single stage at low operating speeds compared to other low-flow, high-head pumps
READ MORE DATA SHEET API Data sheet QUOTE
A series
Self priming pump
- For the Food and Phamaceutical industries
- Suitable for transporting various types of liquids such as oil, wine, spirits and chemical products.
- Flow rates up to 55 m3/h
- Pressure up to 4,8 bar
- Heads up to 48 m
READ MORE DATA SHEET QUOTE
Garbarino MU
Versatile centrifugal pump
- This versatile centrifugal pump is suitable for most applications
- The impeller is designed to be most effective
- For seawater, fresh water, oils, chemicals, petrochemicals products
READ MORE DATA SHEET QUOTE