Chesterton S4+
Protection coating in immersion
Main benefits
- Protect against extreme chemical attack in immersion
- Provide extended wear resistance
- Apply by brush, roller, airless or plural component spraying
DATA SHEET Safety Data Sheet QUOTE
Product description
The protective coating in immersion from the ARC S4+ can be applied by spray system, brush, or roller using a lint free short nap roller such as mohair. When applying ARC S4+ the following conditions should be observed: Film thickness range per coat should be from: 375 µm (15 mil) to 500 µm (20 mil). This protective coating in immersion is normally applied in a minimum of two coats in alternate colors. Application temperature range should be between 16°C (60°F) - 35°C (100°F).
ARC S4+ may be spray applied by airless spray equipment without solvent dilution; consult ARC Technical Bulletin 006 for equipment guidelines.
When spraying, this protective coating in immersion apply initial pass at 75 -125 µm (3-5 mil). Build successive passes to achieve the first coat recommended thickness. Vertical or overhead applications may result in reduced film thickness. Please contact us if you have any question!
