Sturdy bearing assembly and axial heat expansion
ANDRITZ high-pressure pumps are designed for highest flexibility. Numerous horizontal and vertical models allow for efficient building designs. A variety of material and sealing versions guarantee optimal adaptability to the medium. Different hydraulic systems for each pump size enable a selection at the best efficiency point. These pumps are used for various high-pressure municipal and industrial applications, e.g. water supply, irrigation, circulation, boiler feed, and drainage.
High-pressure pumps, HP series
ANDRITZ multi-stage high-pressure pumps from the HP series are used for various industrial applications such as water supply, irrigation, for hot and cold water circulation, firefighting, boiler feed and pressure boosting installations. They are suitable for transporting all clean or slightly dirty non-corrosive liquids up to a viscosity of 150 mm²/s (cSt). Under difficult suction conditions (low NPSH-available), the pump can be provided with an axial inlet for cavitation-reducing flow entry pattern into the first stage impeller.
ANDRITZ HP pump series
|
Design: |
multi-stage, high-pressure |
|
Head: |
up to 400 m |
|
Flow rate: |
up to 950 m³/h |
|
Pressure: |
up to 40 bar |
|
Temperature: |
up to 120° C |
|
Power: |
up to 1.300 kW |
|
Efficiency: |
up to 90% |