A variety of solutions for high pressure, exact metering, chemical injection, viscous media or similar applications
Eccentric screw & Lobe pumps
|
 |
|
Eccentric ("mono") screw and lobe pumps are well suited for viscous media, sludge, gentle (low shear) pumping and dosage. They are also used in applications requiring good suction lift, viscosity variating and particle-handling capabilities. Not available in all Fuglesangs locations.
|
Max capacity:
|
300 m3/hr |
| Max pressure/head: |
80 bar
|
| Materials, wetted parts: |
Pump & Rotor: Cast iron, SS316 & other steel qualities
Stator: NBR, Viton, EPDM, Hypalon & other elastomers |
Screw pumps - 2 & 3 spindles
|
|
Powerful and reliable screw pumps for lubricating oil, fuel oils, marine cargo systems, bitumen, molasses and similar applications. medium-to-high pressure gear pumps. Comes with various options for mounting, relief valves, bearing design and seal types. Maximum temperature capability of 350°C. Maximum viscosity capability of 50000 cSt.
|
| Max flow: |
900 m3/hr
|
| Max pressure: |
120 bar |
| Materials, wetted parts: |
Cast iron, Cast steel, SS316 and other materials |
Sliding vane pumps
|
|
Durable pumps which ensure gentle ("low shear") pumping. Optimized for hydrocarbons, chemicals, gases or viscous media. Specially suited in applications that require that efficiencies are kept constant over time. Seal-less, ATEX and sanitary exections available.
|
Max capacity:
|
500 m3/hr |
Max pressure:
|
21 bar |
| Materials, wetted parts: |
Cast iron, SS316 and other materials
|
Membrane pumps - Medium pressure & Flow
|
|
|
Reliable pumps for metering, injection, high-pressure cleaning, reverse osmosis plants and similar applications. Supplies a virtually pulsation free flow according to API 675 standards. Simple maintenance as it does not have a shaft seal versus the pumped media, and hydraulically actuated membranes. Most versions handle dry-running and throttling of the pump suction. Special slurry versions available. Download brochure (PDF)
|
| Maximum flow: |
138 liter per minute
|
| Maks pressure: |
200 bar
|
| Materials, wetted parts: |
Pump: Cast iron, SS316, Hastelloy, Engineered plastics
Membranes: Nitrile, Viton, PTFE or other materials
|
Triplex Piston pumps- API 674
|
|
Powerful pumps for dosage and injection of chemicals, MEG, glycol and other liquids. Flow is usually regulated by use of Variable Speed (Frequency) Drive.
|
| Max capacity: |
60000 l/hour
|
| Max pressure: |
1200 bar
|
| Materials, wetted parts: |
Cast iron, SS316, SS304 & other materials
|
Piston & Membrane pumps - API 675
|
|
Robust pumps for dosage and injection of chemicals, MEG, glykol and other liquids. Single or double-acting. Manual, electric or pneumatic regulation of flow.
|
| Max capacity: |
16000 l/hour
|
| Max pressure: |
1000 bar (piston) & 550 bar (membrane)
|
| Materials, wetted parts: |
Cast iron, SS316, PVC & other materials |
Piston pumps - Hermetically Sealed Pistons
|
|
|
High quality pumps for metering, injection, water-glycol hydraulics and similar applications. Virtually pulsation free flow. Handles abrasive media and media without lubricating properties, very well. Simple maintenance as it does not have shaft seal facing the pumped media.
|
| Maximum flow: |
800 liter per minute
|
| Maximum pressure: |
415 bar
|
| Materials, wetted parts: |
SS304, Duplex SS, Superduplex SS
|
Gear pumps - Internal & external gears
|
|
Powerful and robust gear pumps. Suits well for viscous media such as oils, bitume, asphalt, pitch and similar applications. Certain models are available with magnetic drive (seal-less desing).
|
| Max flow: |
148 m3/hr |
| Max pressure: |
28 bar |
| Materials, wetted parts: |
Cast iron, Ductile iron, SS316 and other materials |
